Magnetic Separator Overview
Permanent wet magnetic drum separator for sorting the strong fine-grained magnetic minerals, or remove the non-magnetic minerals in the mixed strong magnetic minerals. The magnetic separator can continuously discharge to the mine and ore, the magnetic field is deep, large work space with high processing power.
Magnetic Separator Application
Magnetic separator can process a lot of sorting of minerals such as: magnetite, limonite, hematite, manganese, siderite, limonite, wolframite, manganese carbonate, manganese ore, metallurgical manganese ore, manganese oxide , iron sands, kaolin, rare earth magnetic drum separator mine. This magnetic drum separator can also be used to sorting. Magnetic separator working process is the magnetic field in the magnetic separator, the use of magnetic and mechanical forces on the role of mineral particles to achieve sorting. Different magnetic properties of the mineral particles belongs a different trajectory, which selected two or more separate sub-beneficiation products.
Magnetic Separator Working priciple
The working principle of magnetic separator is that when the slurry into the magnetic field, one of the strong magnetic minerals are adsorbed on the cylinder surface, if the magnetic and non-magnetic minerals is to get rid of discharge, while the adsorption on the surface of the cylinder with the cylinder rotating strong magnetic minerals, was brought the magnetic field, with the rinse water into the concentrate tank to complete the sorting operation.
Magnetic Separator Structure
Diffirent with magenetic drum separator from other magenetic separator suppliers, the same SBM magnetic separator can be equipped with three types of tank:, the downstream slot (CTS), countercurrent tank (CTN) and semi-chute (CTB) to adapt to different sorting requirements.
Shun chute for ore particle size 6-0mm crude selection and selection.
Inverse chute for ore particle size 0.6-0mm election and sweep the election, and the recovery of heavy medium coal preparation industry.
Semi-inverse chute for ore particle size 0.5-0mm selection and selection, especially for mineral particle size of 0.15-0mm Selected.
