Maximum reliability and minimal maintenance
In addition to the spacious large clearance between the jaw crusher and the conveyor belt, the crusher's bottom area is sealed with covers. This design prevents re-bar from being caught by the crusher's member structure. Wide openings on the side frames also ensure easy access to the space below the crusher to remove clogged foreign material.
Comfortable design
To prevent dust, sprinkler nozzles at the top of the jaw crusher, at the tip of the conveyor, and at the intermediate part (under the engine) are provided as standard equipment.
Easy operation
All the switches necessary for operation are located on the main control panel, making it easier for the operator standing on the ground to reach and control the operation. As the control system is equipped with the one-touch start feature, all you have to do is to push the start switch. This simple operation will sequentially start the operation of the muck conveyor, magnetic separator, belt conveyor, jaw crusher and feeder.
Large production capacity
SBM's original large-capacity jaw crusher and the most advanced control systems have considerably increased its output capacity, making it easy to manage large workloads.
High-speed, large-capacity conveyor belt
The high discharge height of 3000 mm 9'10" makes it easy to configure a system with stock pile conveyor and screens. With its width of 1050 mm 42" and a belt speed of 120 m 394' /min., the belt conveyor has a high volume capacity. In addition, the conveyor reverse mode is provided to facilitate the removal of jammed foreign material.
SBM's hydraulic crusher protection mechanism
Jaw crushers typically protect themselves by bending toggle plates when they are clogged or jammed with metal or wood debris. The hydraulic jaw crusher protects itself by allowing the locking cylinders to fully open the discharge port, which makes it easy to remove clogged foreign material from the crusher.
High mobility
The conveyor elevation system insures sufficient ground clearance, which provides the crusher with outstanding maneuverability at any crushing site. In addition, improved configuration and location of the guide handle make it much easier to operate the conveyor lifter. The mobile crusher uses a new interlock system that controls travel and crushing operation, depending on the conveyor's position. The system helps prevent the conveyor from being dragged or contacting the ground and provides clearance between the jaw discharge and the conveyor belt.
Fully automatic discharge setting adjustment system
The jaw crusher is equipped with an automatic discharge setting adjustment system that makes it easy to change the opening of the discharge port. Even as the jaw plates wear, you can adjust the discharge setting with a simple one-touch operation (adjustable within several minutes) with this automatic system. On the monitor panel, you can choose one of the three adjustment modes.
